Introduction

The KSFM Journal of Fluid Machinery - Vol. 17, No. 6

[ Prev] [Go to Volume List] [ Next]

1. p. 5 A Study of Supersonic Nozzle Design for Partial Admitted Turbine Used on Organic Rankine Cycle

Soo-Yong Cho, Chong-Hyun Cho
DOI: https://doi.org/10.5293/kfma.2014.17.6.005

2. p. 13 Performance Test and Aerodynamic Design on the High Pressure Ratio Centrifugal Compressor of a Turbocharger

Hong-Won Kim, Seung-Hyup Ryu, Geun-Sik Lee
DOI: https://doi.org/10.5293/kfma.2014.17.6.013

3. p. 21 Characteristics of Cavitating Flow in Turbopump Inducer/Impeller

Changhyun Kim, Chang-Ho Choi, Jehyun Baek
DOI: https://doi.org/10.5293/kfma.2014.17.6.021

4. p. 29 Numerical Study of Agitation Performance in a Drilling Mud Mixing Tank to Non-Newtonian Rheological Properties

Hyo-nam Im, Hee-woong Lee, In-su Lee, Jae-woong Choi
DOI: https://doi.org/10.5293/kfma.2014.17.6.029

5. p. 38 20kW Turbine Development for OTEC System

Sangjo Han, JongBeom Seo
DOI: https://doi.org/10.5293/kfma.2014.17.6.038

6. p. 44 A Study on CFD Methodology of the Performance Predictionfor the UV Disinfection Reactor

Hyunsoo Kim, Jeonggyu Bak, Kunghyuk Lee, Jinsoo Cho
DOI: https://doi.org/10.5293/kfma.2014.17.6.044

7. p. 52 Design Optimization of Fan-shaped Film Cooling Hole Array on Pressure Side Surface of High Pressure Turbine Nozzle

Sanga Lee, Dong-Ho Rhee, Young-Seok Kang, Jinuk Kim, Do-Young Seo, Kwanjung Yee
DOI: https://doi.org/10.5293/kfma.2014.17.6.052

8. p. 59 A Study on the Flow around a D-shape Bluff Body with Arc-Groove

Seong-Ho Seo, Chung-Do Nam, Hyoung-Woo Lee, Cheol-Hyun Hong
DOI: https://doi.org/10.5293/kfma.2014.17.6.059

9. p. 64 Experimental study on the performance of urban small vertical wind turbine with different types

Deok-Hun Kang, Won-Sik Shin, Jang-Ho Lee
DOI: https://doi.org/10.5293/kfma.2014.17.6.064

10. p. 69 A Study on the Methyl Salicylate Dispersion in the Vicinity of Obstacles by Wind Tunnel Test

Chang-Ki Hong, Han-Sup Uhm, Seung-Ki Choi, Youn-Jea Kim
DOI: https://doi.org/10.5293/kfma.2014.17.6.069

11. p. 77 Thermal-hydraulic Design of A Printed-Circuit Steam Generator for Integral Reactor

Han-Ok Kang, Hun Sik Han, Young-In Kim
DOI: https://doi.org/10.5293/kfma.2014.17.6.077

12. p. 84 Development of an Air-Water Combined Cooling System

Tae-Soon Kwon, Sung-Won Bae
DOI: https://doi.org/10.5293/kfma.2014.17.6.084

13. p. 89 Experimental Methodology Development for SFR Subchannel Analysis Code Validation with 37-Rods Bundle

Dong-Jin Euh, Seok-Kyu Chang, Hwang Bae, Seok Kim, Hyung-Mo Kim, Hae-Seob Choi, Sun-Rock Choi, Hyung-Yeon Lee
DOI: https://doi.org/10.5293/kfma.2014.17.6.089

14. p. 95 Introduction to supercritical CO power conversion system and its development status

Jeong Ik Lee, Yoonhan Ahn, Jae Eun Cha
DOI: https://doi.org/10.5293/kfma.2014.17.6.95

15. p. 104 Design Concept of Hybrid SIT

Tae-Soon Kwon, Dong-Jin Euh, Ki-Hwan Kim
DOI: https://doi.org/10.5293/kfma.2014.17.6.104

16. p. 109 CFD Analysis of a Concept of Nuclear Hybrid Heat Pipe with Control Rod

Yeong Shin Jeong, Kyung Mo Kim, In Guk Kim, In Cheol Bang
DOI: https://doi.org/10.5293/kfma.2014.17.6.109

17. p. 115 Computational Studies on the Performance of Flow Distributor in Tank

Soo Jai Shin, Young In Kim, Seungyeob Ryu, Youngmin Bae
DOI: https://doi.org/10.5293/kfma.2014.17.6.115