KOREAN SOCIETY FOR FLUID MACHINERY

The KSFM Journal of Fluid Machinery

Guidelines for Manuscript Writing

Manuscript Review Policy

Ethical Standard

Journal Archive

Introduction

The KSFM Journal of Fluid Machinery - Vol. 28, No. 5

[ Prev] [Go to Volume List] [ Next]

1. p. 5 Development of a Heat Pipe heat Exchanger Performance Test Rig for Waste Heat Utilization and Thermal Performance Test

Dong Hwan Shin, Jaehwan Shim, Hong Uk Kim
DOI: https://doi.org/10.5293/kfma.2025.28.5.005

2. p. 12 Analysis of Cooling Performance of Hybrid Heat Sink According to Channel Geometries of Thermo Compression Bonding Heater for HBM Fabrication

Min Hyeok Kim, Gi Hyun Sung, Gun Ho Lee, Tae Hoon Yang, Jun Sik Han, Dong Kee Sohn, Han Seo Ko
DOI: https://doi.org/10.5293/kfma.2025.28.5.012

3. p. 23 Heat Transfer Characteristics of Single Wrap-around Loop Heat Pipe for Different Working Fluids

Jungchan Moc, Sukkyung Kang, Gangmin Geum, Jungho Lee
DOI: https://doi.org/10.5293/kfma.2025.28.5.023

4. p. 33 Effect of Tapered Gap Angle and Height on the Thermal Performance of a Two-Phase Cold Plate for High Heat Dissipation

Seokchan Hwang, Junyoung Choi, Jungho Lee
DOI: https://doi.org/10.5293/kfma.2025.28.5.033

5. p. 43 Thermographic Investigation of the Influence of the Internal Structure on the Heat-Spreading Performance of a Vapor Chamber

Eun-sueng An, Jaehyuk Jeong, Wukchul Joung
DOI: https://doi.org/10.5293/kfma.2025.28.5.043

6. p. 54 Numerical Study on Heat Transfer Characteristics of Different Fin Configurations inside a Battery Pack Module Cover Using Polymer Composite Material

Jae-Yoon Park, Myung-Bae Cha, Jae-Hyun Kim, Ju-Won Jeon, Sung-Min Kim
DOI: https://doi.org/10.5293/kfma.2025.28.5.054

7. p. 61 Thermal Performance of Surface Characterization for Two-Phase Immersion Cooling using HFE-7200

Sanghyeon Shin, Su-yoon Doh, Jungho Lee
DOI: https://doi.org/10.5293/kfma.2025.28.5.061

8. p. 71 Heat Transfer Performance and Visualization of a Thermosyphon according to Hydrophobic Coating Characteristics on the Condenser Section

Gyuchang Kim, Jaeseon Lee
DOI: https://doi.org/10.5293/kfma.2025.28.5.071

9. p. 78 Analysis of Heat Transfer Characteristics in a Latent Heat Storage Module Using Circular-Finned Tubes

Ji-Woon Ko, TaeHwan Song, JongHyeon Peck, Jeong-Yeol Kim, SeungJin Oh
DOI: https://doi.org/10.5293/kfma.2025.28.5.078

10. p. 88 Effect of Dropwise Condensation on the Thermal Performance of a Two-Phase Closed Thermosyphon

Kangwon Lee, Joon Su Kim, Youngsuk Nam
DOI: https://doi.org/10.5293/kfma.2025.28.5.088