KOREAN SOCIETY FOR FLUID MACHINERY

The KSFM Journal of Fluid Machinery

Guidelines for Manuscript Writing

Manuscript Review Policy

Ethical Standard

Journal Archive

Introduction

The KSFM Journal of Fluid Machinery - Vol. 19, No. 3

[ Prev] [Go to Volume List] [ Next]

1. p. 5 Design and Assessment of an Oil-treatment Process for Bitumen Separation

Moon Jeong, Sang-Jun Lee, Heung-Sik Shin, Eun-Bi Jo, In-Ju Hwang, Choon-Hyung Kang
DOI: https://doi.org/10.5293/kfma.2016.19.3.005

2. p. 10 A Study on the Flow Characteristics of an Oxidizer Feed Section for Wet-air Oxidation in Gravity Pressure Reactor

Hongcheol Lee, Inju Hwang
DOI: https://doi.org/10.5293/kfma.2016.19.3.010

3. p. 14 A Feasibility Study on the Mixed Refrigerant Composition in the Rankine Cycle Empowered by Cold Energy

Moon Jeong, Eunbi Cho, Inju Hwang, Choonhyoung Kang
DOI: https://doi.org/10.5293/kfma.2016.19.3.014

4. p. 19 Case Studies for Optimizing Heat Exchanger Networks in Steam-assisted Gravity Drainage Oil Sands Plant

Eunbi Cho, Moon Jeong, Choonhyoung Kang
DOI: https://doi.org/10.5293/kfma.2016.19.3.019

5. p. 25 Strength Evaluation of the Plant Facility for Fluid Machinery Using Schmidt Hammer in Cold Regions

Seung-Seo Hong, YoungSeok Kim
DOI: https://doi.org/10.5293/kfma.2016.19.3.025

6. p. 29 Geotechnical Properties of Muskeg Soil for Construction Machinery Distributed in Oil-sand Areas

Seung-Seo Hong, YoungSeok Kim
DOI: https://doi.org/10.5293/kfma.2016.19.3.029

7. p. 33 A Study on the Availability Evaluation with Failure Density Function of Equipment of Small-scale Plant

Hongcheol Lee, Inju Hwang
DOI: https://doi.org/10.5293/kfma.2016.19.3.033

8. p. 37 A Study of Structure Monitoring Applicability of ZigBee Module through Oil Sand Plant Temperature around Canada

Heekwon Yang, Chankil Lee, Bang Yong Lee, Keunbo Park
DOI: https://doi.org/10.5293/kfma.2016.19.3.037

9. p. 43 Evaluation of Horizontal Force on Pile Shaft Surrounded by Vertical PET Aggregate Layer for Fluid Machinery Structure Installation in Cold Region’s Plant

Subin Ji, Sung Min Jang, Soon Gap Hwang, Kicheol Lee, Dongwook Kim
DOI: https://doi.org/10.5293/kfma.2016.19.3.043

10. p. 48 Evaluation of Vacuum Brazed WC and Stainless Steel for Oil Sands Plant

Se-Hun Chang, Seung-Hyun Cho, Seong-Woo Ahn, Joong-Sik Heo, In-Pyo Kim, Ik-Hyun Oh
DOI: https://doi.org/10.5293/kfma.2016.19.3.048

11. p. 53 Study on the Autofrettage Pressure for SCBA Type3 Cylinder

Kwang Seok Kim, Kyomin Lee, Jaehun Lee, Seongmin Cho
DOI: https://doi.org/10.5293/kfma.2016.19.3.053