KOREAN SOCIETY FOR FLUID MACHINERY

The KSFM Journal of Fluid Machinery

Guidelines for Manuscript Writing

Manuscript Review Policy

Ethical Standard

Journal Archive

Introduction

The KSFM Journal of Fluid Machinery - Vol. 20, No. 2

[ Prev] [Go to Volume List] [ Next]

1. p. 5 Improvement of Film Cooling Performance of a Slot on a Flat Plate Using Coanda Effect

Gi Mun Kim, Ye Jee Kim, Jae Su Kwak
DOI: https://doi.org/10.5293/kfma.2017.20.2.005

2. p. 11 CFD Analysis of Leakage Prediction for Brush Element

Kyul Kim, Tae Woong Ha
DOI: https://doi.org/10.5293/kfma.2017.20.2.011

3. p. 17 Rediction of Stage Efficiency Variation of a USC High Pressure Steam Turbine by Computational Fluid Dynamics

Soo Young Kang, Hyuck Jun Jang, Jeong Jin Lee, Tong Seop Kim, Seong Jin Park, Gi Won Hong
DOI: https://doi.org/10.5293/kfma.2017.20.2.017

4. p. 26 20 kW Turbine Aerodynamic Design for EP-OTEC System

Jongbeom Seo, Sang Jo Han
DOI: https://doi.org/10.5293/kfma.2017.20.2.026

5. p. 32 Development of a Performance Diagnosis Program for Gas Turbines Using Turbine Inlet Temperature Correction

Jae Hong Lee, Do Won Kang, Tong Seop Kim
DOI: https://doi.org/10.5293/kfma.2017.20.2.032

6. p. 41 Effects of Blade Configuration on the Performance of Induced Gas Flotation Machine

You-Joon Song, Ji-Gu Lee, Youn-Jea Kim
DOI: https://doi.org/10.5293/kfma.2017.20.2.041

7. p. 47 Performance Test of Turbine Flowmeter According to Temperature Variation

Nam, Ki Han, Park, Jong Ho, Kim, Hong Jip
DOI: https://doi.org/10.5293/kfma.2017.20.2.047

8. p. 53 Effects of Oil Inlet Pressure and Temperature on the Dynamic Behaviors of a Full-Floating Ring Bearing Supported Turbocharger Rotor

In-Beom Lee, Seong-Ki Hong
DOI: https://doi.org/10.5293/kfma.2017.20.2.053

9. p. 63 Performance Predictions of Tilting Pad Journal Bearing with Ball-Socket Pivots and Comparison to Published Test Results

Tae Ho Kim, Tae Gyu Choi
DOI: https://doi.org/10.5293/kfma.2017.20.2.063

10. p. 69 A Study on the Stable Operation of High Sodium Hypochlorite Generation

Haejin Cho, Chanwook Na, Sungho Ko
DOI: https://doi.org/10.5293/kfma.2017.20.2.069

11. p. 75 A Numerical Simulation Study on the Shape of the Rotor in Hydraulic Cavitation Heat Generator

Xun Sun, Myung Seob Shin, Woong Yup Lee, Ae Som Om, Joon Yong Yoon
DOI: https://doi.org/10.5293/kfma.2017.20.2.075

12. p. 82 2016년 압축기 분야 연구동향

서정민
DOI: https://doi.org/10.5293/kfma.2017.20.2.082

13. p. 85 2016년 펌프 및 수차 분야 연구동향

최영도
DOI: https://doi.org/10.5293/kfma.2017.20.2.085

14. p. 89 2016년 가스⋅스팀터빈 분야 연구동향

안준
DOI: https://doi.org/10.5293/kfma.2017.20.2.089

15. p. 93 2016년 회전체 동역학 및 트라이볼로지 요소의 연구동향

김태호, 정성윤
DOI: https://doi.org/10.5293/kfma.2017.20.2.093

16. p. 98 2016년 CFD 분야 연구동향

주현철
DOI: https://doi.org/10.5293/kfma.2017.20.2.098