Introduction

The KSFM Journal of Fluid Machinery - Vol. 28, No. 3

[ Prev] [Go to Volume List] [ Next]

1. p. 6 Analysis of the Technological Spillover Effects of Korean Advanced Aviation Gas Turbine Engine Development

Jaechan Park, Sanghak Lee, Daesik Kim, Ji-ho Park, Haeun Lee
DOI: https://doi.org/10.5293/kfma.2025.28.3.006

2. p. 15 A Study on Maximum Performance Range and Architecture of an Advanced Aero Engine within constraints for Next-generation Fighter

Jaeho Choi, Kangmyung Ko, Hyuntae Shim
DOI: https://doi.org/10.5293/kfma.2025.28.3.015

3. p. 25 Research and Development Status of Micro Gas Turbine for Aviation at Korea Aerospace Research Institute

Young Seok Kang, Heeyoon Chung, Dong-Ho Rhee, Dong-Eun Lee, Seokmin Kim
DOI: https://doi.org/10.5293/kfma.2025.28.3.025

4. p. 35 Advanced Technology Research and Development on Gas Turbine Engines and Hot Section Components at Korea Aerospace Research Institute

Dong-Ho Rhee, Hyung Mo Kim, Jaiho Kim, Young Seok Kang, Heeyoun Chung, Seokmin Kim, DongEun Lee, Jae-Sung Huh, Jaehwan Kim
DOI: https://doi.org/10.5293/kfma.2025.28.3.035

5. p. 46 Performance Sensitivity Analysis of a Power Generation Gas Turbine Subject to a Control Curve

Young Kwang Park, Tong Seop Kim
DOI: https://doi.org/10.5293/kfma.2025.28.3.046

6. p. 56 Vibration and Flutter Analysis of Fan Blades at Design Speed in an Aircraft Turbofan Engine

Dong Hyun Kim, Seoung Jin Go, Dong Il Kim, Hyo Seong Lee
DOI: https://doi.org/10.5293/kfma.2025.28.3.056

7. p. 75 Effects of Effusion Hole Configuration on Combustion Characteristics and Cooling Effectiveness in a Real Gas Turbine Combustor Liner Wall

Sajan Tamang, Zongdao Piao, Heesung Park
DOI: https://doi.org/10.5293/kfma.2025.28.3.075

8. p. 87 Experimental Analysis under Lean Operating Conditions and Validation of the Design on a Hydrogen-Fueled Micromix Combustor Using an Infrared Camera

Jiwan Kim, Yechan Kong, Jiun Han, Suhyeon Park
DOI: https://doi.org/10.5293/kfma.2025.28.3.087

9. p. 97 Measurement of Film Cooling Effectiveness of Fan Shaped Film Cooling Holes Manufactured by Metal Additive Manufacturing

Chae Hyeon Ryu, Ye Rim Jo, Chan Gyu Lee, Young Gi Mun, Jae Su Kwak
DOI: https://doi.org/10.5293/kfma.2025.28.3.097

10. p. 106 Analysis of Cooling Performance according to Film Cooling Hole Location in the Turbine Cooling Cavity

Yerim Jo, Hoseong Son, Byeongkwon Lim
DOI: https://doi.org/10.5293/kfma.2025.28.3.106