KOREAN SOCIETY FOR FLUID MACHINERY

The KSFM Journal of Fluid Machinery

Guidelines for Manuscript Writing

Manuscript Review Policy

Ethical Standard

Journal Archive

Introduction

The KSFM Journal of Fluid Machinery - Vol. 18, No. 1

[ Prev] [Go to Volume List] [ Next]

1. p. 5 Measurement of Ceiling Temperature in Tunnel for Heights and Fire Sizes of Fire Source

Won-Hee Park
DOI: https://doi.org/10.5293/kfma.2015.18.1.005

2. p. 11 Effect of Air Layer on the Performance of an Open Ducted Cross Flow Turbine

Qingsheng Wei, Zhenmu Chen, Patrick Mark Singh, Young-Do Choi
DOI: https://doi.org/10.5293/kfma.2015.18.1.011

3. p. 20 Design of a Pump-Turbine Based on the 3D Inverse Design Method

Chengcheng Chen, Baoshan Zhu, Patrick Mark Singh, Young-Do Choi
DOI: https://doi.org/10.5293/kfma.2015.18.1.020

4. p. 29 Mechanical Load Performance Measurements of a Low Temperature Differential Stirling Engine with Water-Sprayed Heat Transfer according to Supply Water Flow Rates and Temperatures

Kyuho Sim, Min-Seong Jeong, Yoon-Pyo Lee, Seon-Jun Jang
DOI: https://doi.org/10.5293/kfma.2015.18.1.029

5. p. 37 Performance Measurements of A Stirling Engine for Household Micro Combined Heat and Power with Heat Source Temperatures and Cooling Flow Rates

Kyuho Sim, Mingi Kim, Yoon-Pyo Lee, Seon-Jun Jang
DOI: https://doi.org/10.5293/kfma.2015.18.1.037

6. p. 44 Rotordynamic Analysis of See-through-type Labyrinth Seal Using 3D CFD

Tae Woong Ha
DOI: https://doi.org/10.5293/kfma.2015.18.1.044

7. p. 51 A Comparison of Performance of Six and Twelve-Blade Vane Tidal Turbines between Single and Double Blade-row Types

M. H. Nguyen, J. H. Kim, B. K. Kim, C. Yang
DOI: https://doi.org/10.5293/kfma.2015.18.1.051

8. p. 59 An Investigation on Step Responses of Pitch PI Controller for a 2MW Wind Turbine Using Bladed S/W

Chae Wook Lim
DOI: https://doi.org/10.5293/kfma.2015.18.1.059

9. p. 65 Cavitating Flow Analysis of Multistage Centrifugal Pump

Sang-Ho Suh, Hyoung-Ho Kim, Min-Tae Cho, Byeong-Rog Shin
DOI: https://doi.org/10.5293/kfma.2015.18.1.065